It is essential when using chemicals that container labels are read and the directions are followed carefully.
The following guidelines must be observed:
KEEP ALL CHEMICALS OUT OF THE REACH OF CHILDREN.
Chemicals may be corrosive, so handle with care. Store in a cool, dark place
Do not inhale fumes or allow chemicals to come in contact with face or eyes. Wash hands after use.
Ensure any spilled chemicals are carefully cleaned up. They may be corrosive and may cause damage or bodily harm.
Never smoke near chemicals, some are highly flammable.
If chemicals are swallowed or come in contact with your eyes or irritation occurs, follow the emergency instructions on the container.
Accurately measure and use exact quantities specified – never more than what is recommended.
Never add concentrated chemicals directly into the spa. Dilute with water in a large plastic pail.
Always add chemicals to water and never water to chemicals.
Do not mix chemicals with each other before adding to the spa. Add only one chemical at a time.
Make sure the jet pump is in high speed while adding chemicals to the spa.
Leave the jet pump running for at least 15 minutes to properly disperse the chemicals.
When “shocking” or super-chlorinating the spa, leave the spa cover off for 20 minutes to allow oxidizer gas to vent.
See your dealer for regular water tests and information on keeping your spa water balanced.
Some chemicals are more hazardous than others. Container labels and safety data sheets will give you information about the hazards of materials you work with.
Copyright © 2020 Canadian Hot Tub Retailers - All Rights Reserved.
Powered by GoDaddy Website Builder