The Blower is equipped with inline heater coil to preheat the air. With preheated air the Blower will not cool down the water like a traditional blower that pushes cold outside air into the water.
The Blower is mounted in the equipment area to allow the hot air from the pumps to be used and not waste the pump heat.
The Blower is plumbed into the air control pick up lines, this gives the jets a turbo charged effect.
If all the air controls are in the OFF position the Energizer has no place to push the heated air and the Blower will get hot quickly and thermal overload switch will turn off the blower.
Copyright © 2020 Canadian Hot Tub Retailers - All Rights Reserved.
Powered by GoDaddy Website Builder