hot tub waterfalls

 The assembly is made up of 4 parts:

• Clear cover cap / nozzle
• Clear back housing
• 2 Stainless steel screws

The clear cover cap / nozzle has a bead of clear silicone sealant on the lip and is inserted through the hole. The stainless steel screws are hand tightened to spread the silicone and seal to the acrylic . Then 100% clear silicone is applied to the body and back of the shell to offer a second water seal.

The Waterfalls are typically controlled by an ON/OFF valve. The water supplied is typically from “Jet Pump 1”